Paradyne FrameSaver FLEX 9123 User Manual page 238

Table of Contents

Advertisement

B. SNMP MIBs and Traps, and RMON Alarm Defaults
Table B-6.
B-10
linkUp and linkDown Variable-Bindings (2 of 2)
Interface
Variable-Bindings
Physical Sublayer (cont'd)
T
Ethernet Port
T
T
T
Logical Link Sublayer
T
Synchronous
Data Port
T
T
Service Side of the
Frame Relay UNI
T
(Supported by the
media-specific Frame
Relay Services MIB.)
T
Network
T
DTE Side of the Frame
Relay UNI
T
(Supported by the
T
media-specific Frame
Relay DTE's MIB.)
1
The DTR alarm condition will only generate a linkUp/linkDown trap if the DTE
supports the DTR lead state.
2
The RTS alarm condition will only generate a linkUp/linkDown trap if the DTE
supports the RTS lead state.
3
If the LMI Protocol is not configured, a linkUp/linkDown trap is based solely upon
whether the interface is enabled or disabled.
August 2001
Possible Cause
T
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib)
T
T
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib)
T
T
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib)
T
linkDown – Communication is
not possible over the Ethernet
port.
Strings:
'$ifString down.'
'$ifString administratively
shutdown.' (Due to an
intentional shutdown.)
linkUp – Communication on the
port is restored.
String:
'$ifString up.'
linkDown – LMI is down for the
3
LMI Protocol configured,
or
Frame Relay link is disabled.
'$ifString LMI down.' No alarms
exist on the link. (e.g., 'Sync
Data Port S01P1 frame relay
link "Port-1" LMI down.')
'$ifString administratively
shutdown.' (Due to an
intentional shutdown.)
linkUp – LMI is up or Frame
Relay link is enabled.
String:
'$ifString up.'
linkDown – LMI is down for the
3
LMI Protocol configured,
or
Frame Relay link is disabled.
Strings:
'$ifString LMI down.'
'$ifString administratively
shutdown.' (Due to an
intentional shutdown.)
linkUp – LMI is up or Frame
Relay link is enabled.
String:
'$ifString up.'
9123-A2-GB20-20

Advertisement

Table of Contents
loading

Table of Contents