Pvc Connection Status - Paradyne FrameSaver FLEX 9123 User Manual

5. Operation and Maintenance

PVC Connection Status

PVC connection statuses are selected from the Status menu.
Only PVC connections with Source DLCIs configured to be Active are shown. This
screen only appears when Service Type is set to Frame Relay.
PVC Connection Status Screen Example
If the No PVC Connections message appears instead of a list of PVC
connections, no PVC connections have been configured yet.
Table 5-10. PVC Connection Status (1 of 2)
5-20
Main Menu → Status → PVC Connection Status
main/status/connections
Device Name: Node A
Source
Link DLCI EDLCI Link
Port-1 201 Net1-FR1
Port-1 202 Net1-FR1
Port-1 100 Net1-FR1
Port-1 204 Net1-FR1
Mgmt PVC Mgm205 Net1-FR1
Port-1 206 Net1-FR1
Port-1 207 Net1-FR1
Port-1 208 Net1-FR1
Port-1 209 Net1-FR1
Port-1 210 Net1-FR1
--------------------------------------------------------------------------------
Refresh PgUp PgDn
Field Status
Link
Net1-FR1
Port-1
Mgmt PVCName
DLCI 16 to 1007
August 2001
PVC CONNECTION STATUS
Primary Destination
DLCI EDLCI
300 0 Active
1001 0 Active
1001 2 Active
1001 2 Active
1001 2 Active
1001 Active
1001 Active
500 Active
502 2 Inactive
504 2 Inactive
ESC for previous menu
What It Indicates
Identifies the cross-connection of
DLCIs configured for the unit.
T
Source/destination is frame relay
link 1 on Network 1
T
User data port – Port-1
T
Virtual circuit is a management
link that terminates in the unit,
where Name is the link name
For standard DLCIs.
Identifies an individual link/
connection embedded within a DLCI.
9123-C-SLV
03/26/2000 23:32
Page 1 of 2
Status
MainMenu Exit
9123-A2-GB20-20