Generating Reports For A Group; About Service Level Reports; About At-A-Glance Reports - Paradyne FrameSaver FLEX 9123 User Manual

9. Setting Up Network Health for FrameSaver Devices

Generating Reports for a Group

Once Network Health has had sufficient time to gather data from the polled DLCIs
and the DLCIs have been grouped, you can start generating reports. When
selecting a report Section, select WAN from the drop-down list. See Running
Reports from the Console in the Network Health Reports Guide for additional
information. That section also tells you how to schedule automatic report
generation.

About Service Level Reports

For long-term analysis and reporting, you will want to license the Service Level
Reports application. This application analyzes data collected over months, or by
quarters, and provides service level information about an enterprise, a region,
department, or business process. Executive, IT Manager, and Customer Service
Level reports are provided.
Using these reports, you can measure service performance against goals and
agreements. Ranges for service level goals can be set for up to five variables:
availability, bandwidth, bytes, health exceptions, and latency. These ranges need
to be set before reports are scheduled.

About At-a-Glance Reports

At-a-Glance Reports consolidate various important DLCI and network
performance indicators onto a single page. Up to ten DLCIs can be included in an
At-a-Glance Report.
For FrameSaver units with the SLV and SLM reporting feature set, using the
FrameSaver SLV report in
you can compare a DLCI's volume with the network's performance over a specified
period of time. Ranges for service level goals can be set for up to five variables:
availability, bandwidth, bytes, health exceptions, and latency. These ranges need
to be set before reports are scheduled. In addition, all the enhanced network
statistics that only an SLV enhanced device can accurately collect is provided so
you can truly monitor the health of the frame relay network and see the effects of
the customer's utilization on network efficiency.
9-6
NOTE:
Network Health provides information with each chart or table, generally
referred to as a report. Click on the hyperlink (Explanation of...) for an
explanation of the report and its features. You can also refer to the Network
Health Reports Guide .
FrameSaver SLV Plus At-a-Glance Report
August 2001
on page 9-9,
9123-A2-GB20-20