Paradyne FrameSaver FLEX 9123 User Manual page 42

3. Configuration
Using the Easy Install Feature
The Easy Install feature allows the FrameSaver unit to be installed like a standard
leased-line SNMP DSU/CSU. Once the unit is installed and minimal configuration
is completed using this feature, the NOC (Network Operation Center) can
complete configuration of the unit and verify the setup.
Easy Install Screen Example
To access the unit:
T
T
The menu structure and selections, and the features and functions of the
FrameSaver unit, are changed based upon the type of service being used.
3-8
Main Menu → Easy Install
main/easy_install
Device Name: Node A
Service Type:
Node IP Address:
Node Subnet Mask:
TS Access:
Create a Dedicated Network Management Link
Ethernet Port Options Screen
Time Slot Assignment Screen
Network 1 Line Framing Format:
Network 1 Line Build Out (LBO):
Network 1 Line Coding Format:
DS0 Base Rate (Kbps):
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
For non-managed networks , use the TS Access DLCI to ping the unit five
times within five seconds.
For managed networks , use the Dedicated Network Management Link that
was created.
August 2001
EASY INSTALL
Frame Relay
000.000.000.000 Clear
000.000.000.000 Clear
DLCI 980
ESF
0.0
B8ZS
Nx64
9123-C-SLV
3/26/2000 23:32
MainMenu Exit
9123-A2-GB20-20