Device Tests; Lamp Test - Paradyne HOTWIREt 7984 User Manual

Testing

Device Tests

Î

Lamp Test

5-8
The Device Tests branch is used to access the only card-level test, the Lamp
Test. To access the Device Tests screen, follow this menu selection sequence:
Main Menu Test
main/test/card
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
The Lamp test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
1. Position the cursor at the Start command next to Lamp Test on the Card
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp test, all LEDs blink
simultaneously every second. When you stop the Lamp test, the LEDs are
restored to their normal condition.
3. To stop the lamp test, position the cursor at the Stop command.
4. Press Enter.
February 1999
Device Tests
DEVICE TESTS
Test Command Status
Lamp Test: Start Inactive
Hotwire
Model: 7974
Î Î
MainMenu Exit
7984-A2-GB20-10