Table of Contents
Advertisement
Procedure
To limit asynchronous terminal access to the menu-driven user interface:
9123-A2-GB20-20
1. Select the Communication Port options.
Main Menu → Configuration → Management and Communication →
Communication Port
2. Set the following configuration options, as appropriate.
To . . .
Require a login
Limit the effective access level
to Level-3 or Level-2
NOTE:
Should you be locked out inadvertently, see
Restoring Communication
3. Save your changes.
August 2001
Set the configuration option . . .
Login Required to Enable.
NOTE: User ID and password combinations must be
defined. See
Creating a Login
Port Access Level to Level-2 or Level-3.
NOTE: Regardless of a user's login access level, a
user cannot operate at a level higher than the
access level specified for the port (e.g., if a user has
a Level-1 login and Level-2 port access has been
set, the Level-1 user can only operate as a Level-2
user).
If you are going to allow Level-1 users to configure
the unit, keep the access at Level-1.
Resetting the Unit and
in Chapter 6, Troubleshooting .
4. Security and Logins
on page 4-11.
4-3
Advertisement
Table of Contents
Troubleshooting
