Paradyne FrameSaver FLEX 9123 User Manual page 240

B. SNMP MIBs and Traps, and RMON Alarm Defaults
Table B-7.
B-12
enterprise-Specific Traps and Variable-Bindings (2 of 3)
Trap Variable-Bindings
T
enterpriseMissedSLV-
Down(16)
T
T
T
enterpriseMissedSLV-
Up(116)
T
enterprisePrimary-
ClockFail(1)
enterprisePrimary-
ClockFailClear(101)
T
enterpriseRMON-
ResetToDefault(13)
T
enterpriseSelfTest-
Fail(2)
August 2001
Possible Cause
devFrExtDlciIfIndex SLV Timeout Error Event
(devFrExt.mib) Threshold has been exceeded.
String:
devFrExtDlciDlci
(devFrExt.mib) 'SLV down on $ifString due to
excessive SLV packet loss. Total
devFrExtDlciMissed-
SLV packets lost is $numLost.'
SLVs (devFrExt.mib)
SLV Timeout Error Event has
devLastTrapString
been cleared.
(devHealthAndStatus.-
mib.)
String:
'SLV up on $ifString because SLV
communication was
reestablished. Total SLV packets
lost is $numLost.'
devLastTrapString Operating software has detected
(devHealthAndStatus.- that the primary clock source has
mib) failed.
String:
'Primary clock failed.'
Operating software has detected
that the primary clock source is
operational again.
String:
'Primary clock restored.'
devLastTrapString All RMON-related option changes
(devHealthAndStatus.- have been reset to their default
mib) values.
Default Factory Configuration
settings have been reloaded,
returning RMON-related options
to their original settings.
String:
'RMON database reset to
defaults.'
devLastTrapString Unit has completed
(devHealthAndStatus.- (re)initialization and a hardware
mib) failure was detected.
String:
'Self test failed: $ s .' ($ s is the
contents of devSelfTestResult.)
9123-A2-GB20-20