Paradyne FrameSaver FLEX 9123 User Manual page 141

Table 5-13. DLCI Performance Statistics (2 of 2)
9123-A2-GB20-20
Statistic What It Indicates
T T
With BECN Set
Total Rx Frames/ Total number of data frames and octets (8-bit bytes) received for
Rx Octets the selected DLCI on the frame relay link.
T T
Within CIR **
T T
Between
CIR&EIR **
T T
Above EIR **
T T
With DE Set
T T
With BECN Set
T T
With FECN Set
* Only appears for the network interface.
** Only appears for units with the FLEX SLV feature set.
August 2001
The number of frames and octets sent on the selected DLCI
of the frame relay link with backward explicit congestion
notifications.
BECNs are sent to notify users of data traffic congestion in
the opposite direction of the frame carrying the BECN
indicator.
The number of frames and octets received on the selected
DLCI of the frame relay link that were within the committed
information rate.
The number of frames and octets received on the selected
DLCI of the frame relay link that were between the committed
information rate and excess information rate.
The number of frames and octets received on the selected
DLCI of the frame relay link that were above the excess
information rate.
The number of frames and octets received on the selected
DLCI of the frame relay link with the discard eligible bit set.
The number of frames and octets received on the selected
DLCI of the frame relay link with backward explicit congestion
notifications.
BECNs are sent to notify users of data traffic congestion in
the opposite direction of the frame carrying the BECN
indicator.
The number of frames and octets received on the selected
DLCI of the frame relay link with forward explicit congestion
notifications.
The network sends FECNs to notify users of data traffic
congestion in the same direction of the frame carrying the
FECN indicator.
5. Operation and Maintenance
5-31