Table of Contents
Advertisement
B. SNMP MIBs and Traps, and RMON Alarm Defaults
Object ID Cross-References (Numeric Order)
The FrameSaver unit supports automatic generation of RMON alarm and event
information. Each alarm sets an SNMP variable to monitor. When the threshold set
for the monitored variable is exceeded, an SNMP trap is sent and/or a log entry is
made.
This table is helpful in identifying alarm conditions being tracked when viewing the
NetScout Custom History screen (shown below), which provides the OID instead
of the alarm condition.
See
RMON alarm OID cross-reference.
B-22
Table B-14
for an RMON history OID cross-reference and
August 2001
Table B-15
for an
9123-A2-GB20-20
Advertisement
Table of Contents
Troubleshooting
