Network Lmi-Reported Dlcis Status - Paradyne FrameSaver FLEX 9123 User Manual

5. Operation and Maintenance

Network LMI-Reported DLCIs Status

Network LMI-reported DLCI statuses are selected from the Status menu.
The LMI Reported DLCIs screen displays the status and CIR (if supported by the
switch) for each DLCI, whether the DLCI is configured or not.
This screen only appears when Service Type is set to Frame Relay.
LMI-Reported DLCIs Status Screen Example
An asterisk (*) next to the DLCI indicates that the DLCI has been configured for the
link.
DLCIs without an asterisk have not been configured in the unit. These DLCIs pass
through the unit transparently, without being monitored and with no
demultiplexing/multiplexing of management diagnostics or user data being
performed. Only DLCIs on the Net1-FR1 and Port-1 frame relay links appear on
this screen; nonconfigured DLCIs on other links are discarded. See
Network LMI-Reported DLCIs
5-18
Main Menu → Status → LMI Reported DLCIs
main/status/lmi_dlcis
Device Name: Node A
frame relay link LMI REPORTED DLCIs
DLCI STATUS
* 300 Active
* 305 Inactive
* 400 Deleted
* 410 Inactive
411 Inactive
420 Inactive
430 Active
501 Inactive
511 Active
520 Active
* – DLCI is configured on the Frame Relay Link.
--------------------------------------------------------------------------------
Refresh PgUp PgDn
August 2001
CIR (bps) DLCI STATUS
16000 * 622 Active
* 624 Active
* 625 Deleted
* 713 Active
* 822 Active
32000 * 1002 Active
256000
64000
ESC for previous menu
NextLink
Status.
9123-C-SLV
3/26/2000 23:32
Page 1 of 2
CIR (bps)
32000
32000
32000
32000
32000
MainMenu Exit
PrevLink
Table 5-9,
9123-A2-GB20-20