Paradyne FrameSaver FLEX 9123 User Manual page 66

3. Configuration
Assigning the Synchronous Data Port to Network Time Slots
If Service Type is set to Leased Line, the Sync Data Port Assignment screen
appears. Use this screen to assign the synchronous data port to network interface
time slots. Follow one of the following menu selection selections:
Synchronous Data Port Assignment Screen Example
3-32
Main Menu → Configuration → Time Slot Assignment →
Sync Data Port Assignments or
Main Menu → Easy Install → Time Slot Assignment Screen (When Service
Type is set to Leased Line.)
main/config/tslot_assign/sync_data/net
Device Name: Node A
N01 N02 N03
Assigned Assigned Assigned
N09 N10 N11
Assigned Assigned Assigned
N17 N18 N19
Available Available Available Available Available Available Available Available1
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Value Meaning
Assign To Specifies Net1 (network) time slots.
N tt This field represents time slot tt of the network interface.
Available The time slot is currently unassigned.
Port-1 Synchronous data Port-1 is assigned to the time slot.
August 2001
SYNC DATA PORT ASSIGNMENT
Assign To: Net1
N04 N05
Assigned Assigned Port-1
N12 N13
Assigned Assigned Port-1
N20 N21
ClearAll
9123-C-SLV
2/24/2000 23:32
N06 N07 N08
Port-1 Assigned
N14 N15 N16
Port-1 Available
N22 N23 N24
MainMenu Exit
9123-A2-GB20-20