Table of Contents
Advertisement
4. Security and Logins
Controlling SNMP Access
The FrameSaver unit supports SNMP Version 1, which provides limited security
through the use of community names. There are three methods for limiting SNMP
access:
T
T
T
Disabling SNMP Access
When the SNMP access is disabled, the FrameSaver unit will not respond to
SNMP messages.
Procedure
To disable SNMP access:
See
more information about General SNMP Management configuration options.
4-8
Disabling SNMP access.
Assigning SNMP community names and the access type.
Assigning IP addresses of those NMSs that can access the unit.
1. Select the General SNMP Management options.
Main Menu → Configuration → Management and Communication →
General SNMP Management
2. Disable the SNMP Management option.
3. Save your change.
Configuring General SNMP Management
August 2001
in Chapter 3, Configuration, for
9123-A2-GB20-20
Advertisement
Table of Contents
Troubleshooting
