Selecting From A Menu; Switching Between Screen Areas - Paradyne FrameSaver FLEX 9123 User Manual

2. User Interface and Basic Operation

Selecting from a Menu

Procedure
To select from a menu:
Procedure
To return to a previous screen, press the Escape (Esc) key until you reach the
desired screen.

Switching Between Screen Areas

Use Ctrl-a to switch between screen areas (see
Procedure
To switch to the function keys area:
To return to the screen area, press Ctrl-a again.
2-8
1. Tab or press the down arrow key to position the cursor on a menu selection, or
press the up arrow key to move the cursor to the bottom of the menu list.
Each menu selection is highlighted as you press the key to move the cursor
from position to position.
2. Press Enter. The selected menu or screen appears.
1. Press Ctrl-a to switch from the screen area to the function keys area.
2. Select either the function's designated (underlined) character or Tab to the
desired function key.
3. Press Enter. The function is performed.
August 2001
Screen Work Areas
on page 2-5).
9123-A2-GB20-20