Device Tests; Lamp Test - Paradyne 7974 User Manual

Device Tests

The Device Tests branch is used to access the only card-level test, the Lamp Test.
To access the Device Tests screen, follow this menu selection sequence:

Lamp Test

The Lamp Test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
7900-A2-GB21-20
Main Menu Test Device Tests
main/test/card
Test
--------------------------------------------------------------------------------
Lamp Test:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor at the Start command next to Lamp Test on the Device
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp Test, all LEDs blink
simultaneously every second. When the Lamp Test is stopped, the LEDs are
restored to their normal condition.
3. To stop the Lamp Test, position the cursor at the Stop command and
press Enter.
December 2001
DEVICE TESTS
Command Status
Start Inactive
8. Testing
Model: 797x
MainMenu Exit
8-17