Esf Line Performance Statistics - Paradyne FrameSaver FLEX 9123 User Manual

ESF Line Performance Statistics

These statistics appear when ESF Line is selected from the Performance Statistics
menu for the network interface.
Only seven T1 network statistical intervals appear on the screen at any one time.
You can choose which intervals to display on your screen by entering:
T
T
Edit any of the interval or time fields on lines 10, 13, or 16. When Enter is pressed,
the values change to the selected range.
9123-A2-GB20-20
Main Menu → Status → Performance Statistics → ESF Line
Interval Number (01–96)
– or –
Time (Hours and Minutes)
NOTES:
— Interval 01 is the interval occurring just prior to the current one; Interval 02
is 2 intervals prior to the current one, etc.
— Selecting a specific time is useful when the approximate time at which a
specific event occurred is known.
To select intervals . . .
Occurring on and before a
selected interval or time
Bracketing a selected
interval or time
Occurring on and after a
selected interval or time
August 2001
You must enter an interval or time on . . .
Line 10. The display will include the selected interval plus
the 6 intervals recorded before it.
Line 13. The display will include the selected interval plus
the 3 intervals recorded before it and the 3 intervals
recorded after it.
Line 16. The display will include the selected interval plus
the 6 intervals recorded after it.
5. Operation and Maintenance
5-35