Ricoh Type M12 Field Service Manual page 70

3. Troubleshooting
Code
15-80 Mail Job Task Read Error
Repeated Destination Registration
15-81
Error
15-91 Send Registration Error
15-92 Memory Overflow
15-93 Memory Access Error
15-94 Incorrect ID Code
15-95 Transfer Station Function
16-00 No IP address registered
68
Meaning
Could not receive the file for transfer to the final
destination:
Suggested Cause/Action
• Could not receive the transmission because the
destination buffer is full and the destination could
not be created (this error may occur when
receiving a transfer request or a request for
notification of reception).
• Could not repeat receive the transmission
because the destination buffer is full and the
destination could not be created (this error may
occur when receiving a transfer request or a
request for notification of reception).
• The format of the final destination or the transfer
destination is incorrect.
• Destinations are full so the final and transfer
destinations could not be created.
• Transmission could not be received because
memory overflowed during the transaction.
• Transaction could not complete due to a
malfunction of SAF memory.
• The machine rejected an incoming e-mail for
transfer request, because the ID code in the
incoming e-mail did not match the ID code
registered in the machine.
• The machine rejected an incoming e-mail for
transfer because the transfer function was
unavailable.
• The machine does not get an IP address
because the DNS server has not been registered
for the remote machine or IP address of the
remote machine has not been registered.
• Register the DNS server for the remote machine
or configure an IP address of the remote
machine.