Ricoh Type M12 Field Service Manual page 129

4-7 Not used
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
No Function
Minimum interval between automatic
0-7
dialing attempts
No Function
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
No Function
0-3 Not used
Printout of the message when acting
as a Transfer Station
4
0: Disabled, 1: Enabled
5-7 Not used
Communication Switch 0C - Not used (do not change the settings)
Do not change the settings.
Communication Switch 09 (SP No. 1-104-009)
This value is the minimum time that the machine
waits before it dials the next destination.
Communication Switch 0A (SP No. 1-104-011)
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change these settings.
Communication Switch 0B (SP No. 1-104-012)
Do not change these settings.
When the machine is acting as a Transfer Station, this
bit determines whether the machine prints the fax
message coming in from the Requesting Terminal.
Do not change the settings.
Communication Switch 0D (SP No. 1-104-014)
Bit Switches - 3
Comments
Comments
Comments
127