Ricoh Type M12 Field Service Manual page 160

4. Service Tables
Network I/F setting for SIP connection
0 0: IPv4
1: IPv6.
Network I/F setting for Fax
communication
1
0: Same setting as SIP server connection
1: Automatic setting
Record-route setting
2 0: Disable
1: Enable
re-INVITE transmission delay timer
setting
Bit 4
0
3-4
0
1
1
SIP-IPFAX: Adding vender information
selection
5
0: Declare T38VendorInfo=RICOH
1: Not declare T38VendorInfo=RICOH
6-7 Not used.
IP Fax Switch 0A - Not used (do not change the settings)
IP Fax Switch 0B - Not used (do not change the settings)
IP Fax Switch 0C - Not used (do not change the settings)
IP Fax Switch 0D - Not used (do not change the settings)
158
Selects the connection type (IPV4 or IPV6) to
connect to the SIP server.
0: The I/F setting for fax communication follows
the setting for SIP server connection.
1: The negotiation between the SIP server and the
device decides whether IPv4 or IPv6 is used for
the I/F setting for fax communication.
0: Disables the record-route function of the SIP
server.
1: Enables the record-route function of the SIP
server.
Bit 3
This changes the interval for transmit re-INVITE
0 No delay
after receiving the ACK message transmitted by T.
38 device.
1 1 sec
0 2 sec
1 3 sec
0: Use this setting normally.
1: This setting is used only when a customer wants
to connect the machine with SIP server + VOIP-
GW provided by AVAYA Inc.
Do not change these settings.
IP Fax Switch 0E (SP No. 1-111-013)