4. Service Tables
RX Text Mail Header Processing
This setting determines whether the header information is printed with text e-mails when they
are received.
0: Prints only text mail.
0
1: Prints mail header information attached to text mail.
When a text mail is received with this switch On (1), the "From" address and "Subject"
address are printed as header information.
When a mail with only binary data is received (a TIFF-F file, for example), this setting is
ignored and no header is printed.
Output from Attached Document at E-mail TX Error
This setting determines whether only the first page or all pages of an e-mail attachment are
printed at the sending station when a transmission error occurs. This allows the customer to
1
see which documents have not reached their intended destinations if sent to the wrong e-mail
addresses, for example.
0: Prints 1st page only.
1: Prints all pages.
Text String for Return Receipt
2-3
This setting determines the text string output for the Return Receipt that confirms the
transmission was received normally at the destination.
110