Ricoh Type M12 Field Service Manual page 158

4. Service Tables
Modem setting for reception
Sets the modem type for reception. The default is "0100" (V27ter, V29, V17).
Bit 7
0
4-7
0
0
0
Other settings - Not used
No.
TSI information
0
0: Not added, 1: Added
DCN transmission setting at T1 timeout
1 0: Not transmitted
1: Transmitted
2 Not used
Hang up setting at DIS reception
disabled
3
0: No hang up
1: Hang up after transmitting DCN
Number of times for training
4
0: 1 time, 1: 2 times
Space CSI transmission setting at no CSI
registration
5
0: Not transmitted
1: Transmitted
6-7 Not used
156
Bit 6 Bit 5
0 0
0 1
0 1
1 0
IP Fax Switch 07 (SP No. 1-111-008)
Function
Bit 4
1 V.27ter
0 V.27ter, V.29
1 V.27ter, V.29, V.33
0 V.27ter, V.29, V.17/V.33
Comments
Adds or does not add TSI information to NSS(S).
Transmits or does not transmit DCN at T1 timeout.
Do not change this setting.
Sets whether the machine disconnects after DIS
reception.
Selects the number of times training is done at the
same bit rate.
When "0" is selected, frame data is enabled.
When "1" is selected, the transmitted data is all
spaces.
Do not change these settings.
Types