Ricoh Type M12 Field Service Manual page 47

6. Reinstall the new fax unit in the FCU slot (
7. Remove the controller rear cover [A] (
8. Attach the bracket [A] provided with the new fax unit to the center frame of the controller
box ( x 1).
9. Attach the FCU board removed in step 3 to the bracket attached in step 8. Then attach the
flat cable attached in step 4 to CN603 of the removed FCU board (
• Make sure that the blue tape of the flat cable faces outward.
x 3).
x 5).
FCU
x 1).
45