Ricoh Type M12 Field Service Manual page 133

Action when there is no box with an
F-code that matches the received
SUB code
7
0: Disconnect the line
1: Receive the message
(using normal reception mode)
No Function
0-4 Not used
IP-Fax dial-in routing selection
5 0: Off
1: On
PSTN 2 dial-in routing
6 0: Off
1: On
PSTN 3 dial-in routing
7 0: Off
1: On
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
No Function
Extension access code (0 to 7) to
turn V.8 protocol On/Off
0-7
0: On
1: Off
Change this setting when the customer requires.
Communication Switch 18 (SP No. 1-104-025)
Do not change the settings.
1: Transfers received data to each IP-Fax dial-in number.
IP-Fax dial-in number is a 4-digit number.
Enables or disables dial-in routing for the PSTN 2
connection.
Enables or disables dial-in routing for the PSTN 3
connection.
Communication Switch 1B (SP No. 1-104-028)
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set bit 0 to 1.
When the machine detects "0" as the first dialed number,
it automatically disables V.8 protocol. (Alternatively, if
"3" is the PSTN access code, set bit 3 to 1.)
Bit Switches - 3
Comments
Comments
131