Mazda CX-9 Grand Touring 2009 Manual page 616

Plate thickness: 1 mm {0.04 in} or more
Fig. 37: Pressing Bearing Outer Race
Courtesy of MAZDA MOTORS CORP.
SPACER, BEARING INNER RACE ASSEMBLY NOTE
Pinion height adjustment
NOTE:
Use the same spacer.
Install the spacer with the chamfer on the SST side.
1. Assemble the spacer, the bearing inner race (rear bearing), and the SST O-ring to the SST (49 8531 565)
as shown in the figure.
2. Insert the set assembled in Step 1 to the differential gear from the rear.
3. Assemble the bearing inner race (front bearing), SST (49 G027 005), companion flange, washer, and
locknut from the front of the differential gear.
4. Tighten the locknut to the extent that the SST (49 8531 565) can be turned by hand.
5. Place the SST (49 0305 555) on top of the SST (49 8531 565).
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Differential - Mazda CX-9