Usage Guide:
To enable IP VLAN interface.
Example:
To enable IP VLAN interface(VLAN 2).
Switch# configure terminal
Switch (config)# ip interface vlan 2
4.3.11 ip route
Command:
ip route <IP Network> <Next Hop>
<IP Network>
<Next Hop>
Default:
N/A
Usage Guide:
To configure static route.
Example:
To configure static route(Network: 192.168.1.0/24, Next Hop: 192.168.0.10).
Switch# configure terminal
Switch (config)# ip route 192.168.1.0/24 192.168.0.10
4.3.12 lacp system-priority
Command:
lacp system-priority <1-65535>
<1-65535>
Default:
32768
Usage Guide:
To configure system priority of LACP.
Example:
To configure system priority (32768) of LACP.
IP Network
Next Hop
LACP system priority <1-65535> default 32768
-53-
Command Guide