Ip Configuration - Planet Networking & Communication GS-6320 Series User Manual

4.2.1.2 IP Configuration

The IP Configuration includes the IP Configuration, IP Interface and IP Routes. The configured column is used to view or
change the IP configuration. The maximum number of interfaces supported is 128 and the maximum number of routes is 128.
The screen in Figure 4-2-1-2
The current column is used to show the active IP configuration.
Object
• IP Configurations
Domain Name
Mode
DNS Server
DNS Proxy
•
IP Interface Delete
VLAN
User's Manual of GS-6320 and MGS-6320 Managed Switches
appears.
Figure 4-2-1-2: IP Configuration Page Screenshot
Description
Configure the Switch Domain Name
Configure whether the IP stack should act as a Host or a Router. In
Host mode, IP traffic between interfaces will not be routed. In Router
mode traffic is routed between all interfaces.
This setting controls the DNS name resolution done by the switch. The
following modes are supported:
 No DNS server
 Configure IPv4 or IPv6
 From any DHCPv6 interfaces
 From this DHCPv6 interface
When DNS proxy is enabled, system will relay DNS requests to the
currently configured DNS server, and reply as a DNS resolver to the
client devices on the network.
Select this option to delete an existing IP interface.
The VLAN associated with the IP interface. Only ports in this VLAN will
No DNS server will be used..
Explicitly specify the name of local domain.
Make sure the configured domain name meets your organization's
given domain.
The first domain name offered from a DHCPv6 lease to a
DHCPv6-enabled interface will be used.
Specify from which DHCPv6-enabled interface a provided domain
name should be preferred.
55