Switch (config)# interface ge4
Switch (config-ge4) # mac-address-learning enable
4.3.5.20 mirror interface
Command:
mirror interface <port> { both | receive | transmit}
<port>
Mirrored Port
both
Mirror traffic in both directions
receive
Mirror received traffic
transmit
Mirror transmit traffic
Default:
Disabled
Usage Guide:
To configure Mirrored Port
Example:
To set Mirrored Port (ge11, Tx + Rx)
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # mirror interface ge11 direction both
4.3.5.21 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function for specific interface
Example:
To enable the function (mirror interface ge11 direction both) for ge4.
-32-
Command Guide