Default:
N/A
Usage Guide:
To configure MSTP instance path-cost or priority for ports.
Example:
To configure MSTP instance (1) or priority(16) for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # instance 1 priority 16
4.3.5.7 ip dhcp snooping
Command:
ip dhcp snooping { limit rate <1-2048> | trust }
limit rate
<1-2048>
DHCP packets numbers per sec
trust
DHCP-snooping trust
Default:
Unlimited
Usage Guide:
To configure DHCP snooping trust-port or limit rate for ports.
Example:
To configure DHCP snooping trust-port for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # ip dhcp snooping trust
4.3.5.8 jumbo-frame
Command:
jumbo-frame < 1500-13312 >
< 1500-13312 >
DHCP-snooping limit rate
jumbo-frame in bytes
-25-
Command Guide