Static-Channel-Group; System-Monitor Debug - Planet Networking & Communication GS-2240-48T4X Command Manual

Switch# configure terminal
Switch (config)# snmp-server location Server123

4.3.29 static-channel-group

Command:
static-channel-group <1-32>
<1-32> Channel group number
Default:
Disabled
Usage Guide:
To enable the static-channel-group ID
Example:
To enable the static-channel-group ID 1
Switch# configure terminal
Switch (config)# static-channel-group 1

4.3.30 system-monitor debug

Command:
system-monitor debug
Default:
Disable
Usage Guide:
To enable the system-monitor of debug mode
Example:
To enable the system-monitor of debug mode
Switch# configure terminal
Switch (config)# system-monitor debug
-64-
Command Guide