Trace-Route; Undebug; Undebug All - Planet Networking & Communication GS-2240-48T4X Command Manual

4.18 trace-route

4.18.1 trace-route
Command:
trace-route <ip>
<ip> host IP address (e.g. 10.0.0.1)
Default:
None
Usage Guide:
To trace routing the IP address
Example:
To trace routing the 192.168.0.5
Switch # trace-route 192.168.0.5

4.19 undebug

4.19.1 undebug all

Command:
undebug all
all Turn off all debugging
Default:
None
Usage Guide:
To disable debug mode.
Example:
To disable debug mode.
Switch # undebug all
-97-
Command Guide