4.2.8 clear spanning-tree detected protocols
Command:
clear spanning-tree detected protocols{ bridge | <1-32> } | { interface <Port list> }
Default:
N/A
Usage Guide:
To clear the STP statistics.
Example:
To clear the Switch's bridge 1 STP statistics.
Switch# clear spanning-tree detected protocols bridge 1
4.3 configure terminal
4.3.1 aaa authentication login console local
Command:
arp <ip> <HHHH.HHHH.HHHH>
<ip>
IP address.
<HHHH.HHHH.HHHH>
Default:
N/A
Usage Guide:
To configure static ARP table in the VLAN1.
Example:
To configure static ARP table(IP address: 192.168.0.79, MAC address: 00:30:20:00:30:00) in the VLAN1.
Switch# configure terminal
Switch (config)# arp 192.168.0.79 0030.2000.3000
MAC address.
-19-
Command Guide