Usage Guide:
To configure access VLAN ID for specific interface
Example:
To configure access VLAN ID (5) for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # switchport access vlan 5
4.3.5.34 switchport hybrid vlan
Command:
switchport hybrid vlan <vlan_list>
<vlan_list>
<2-4094> The default VID for the interface
Default:
PVID=1
Usage Guide:
To configure PVID of Hybrid VLAN for specific interface
Example:
To configure PVID 2 of Hybrid VLAN of Hybrid VLAN for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # switchport hybrid vlan 2
4.3.5.35 switchport hybrid allowed vlan
Command:
switchport hybrid allowed vlan [all | none | add <vlan_list> | remove <vlan_list> |
except <vlan_list>]
switchport
hybrid
Change PVID for hybrid port
allowed
Set allowed VLAN characteristics when interface is in hybrid mode
<vlan_list>
VLAN IDs of the allowed VLANs when this port is in hybrid mode
add
Add VLANs to the current list
Switching mode characteristics
-39-
Command Guide