Copy - Planet Networking & Communication GS-2240-48T4X Command Manual

disable disable web function
enable enable web function
max-connect max-connect
<1-8> max num of connect
refresh-interval
<100-10000> time of refresh interval (default 1000 ms)
Default:
N/A
Usage Guide:
To configure the web service
Example:
To disable the web service
Switch# configure terminal
Switch (config)# web disable

4.4 copy

4.4.1 copy
Command:
copy { flash| tftp |startup-config | running-config | <source_path> } { startup-config |
running-config | <destination_path> | flash| tftp } [ syntax-check ]
copy Copy from source to destination
flash:filename | tftp://server/path-and-filename
running-config Currently running configuration
startup-config Startup configuration Output modifiers
syntax-check Perform syntax check on source configuration
Default:
None
Usage Guide:
To copy configuration from source to destination
Example:
To copy configuration from source (running-config) to destination (startup-config)
Switch# copy running-config startup-config
refresh-interval
File in FLASH or on TFTP server
-68-
Command Guide