Spanning-Tree Edgeport; Spanning-Tree Force-Version - Planet Networking & Communication GS-2240-48T4X Command Manual

4.3.5.26 spanning-tree edgeport

Command:
spanning-tree edgeport
Default:
Non-Edge
Usage Guide:
To enable edge port of CIST Normal Port Configuration for specific interface
Example:
To enable edge port of CIST Normal Port Configuration for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # spanning-tree edgeport

4.3.5.27 spanning-tree force-version

Command:
spanning-tree force-version <0-3>
<0-3> Version identifier - 0- STP ,1- Not supported ,2 -RSTP, 3- MSTP
Default:
MSTP
Usage Guide:
To cnfigure STP version for specific interface
Example:
To cnfigure STP version(MSTP) for for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-if) # spanning-tree force-version 3
-35-
Command Guide