Description; Exit - Planet Networking & Communication GS-2240-48T4X Command Manual

Example:
To enable active mode for the LACP profile 1 in the ge4.
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # channel-group 1 mode active

4.3.5.3 description

Command:
description <description>
<description>
Default:
Disabled
Usage Guide:
To configure specific description for the interface description.
Example:
To configure specific description(internet) for the interface ge4 description.
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # description internet

4.3.5.4 exit

Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Interface specific description
-23-
Command Guide