Flowcontrol; Instance - Planet Networking & Communication GS-2240-48T4X Command Manual

Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # exit
Switch (config)#

4.3.5.5 flowcontrol

Command:
flowcontrol {receive | send} {off | on}
flowcontrol Traffic flow control.
receive Flow control on receive.
send Flow control on send.
off Disable flow control.
on Enable flow control.
Default:
Disable
Usage Guide:
To enable Flow-control for specific interface
Example:
To enable Flow-control(RX) for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # flowcontrol receive on

4.3.5.6 instance

Command:
instance <1-15> { path-cost <1-200000000> | priority <0-240> }
<1-15> Green ethernet (Power reduction)
path-cost Enable power saving for ports with no link partner.
<1-200000000>
priority Enable power saving for ports with no link partner.
<0-240> Enable power saving for ports with no link partner.
Enable power saving for ports with no link partner.
-24-
Command Guide