Table of Contents
Advertisement
4.2.1.2 IP Configuration
The IP Configuration includes the IP Configuration, IP Interface and IP Routes. The configured column is used to view or
change the IP configuration. The maximum number of interfaces supported is 128 and the maximum number of routes is 128.
The screen in
Figure 4-2-1-2
The current column is used to show the active IP configuration.
Object
IP Configurations
Domain Name
Mode
DNS Server
appears.
Figure 4-2-1-2: IP Configuration Page Screenshot
Description
Configure the Switch Domain Name
Configure whether the IP stack should act as a Host or a Router. In Host
mode, IP traffic between interfaces will not be routed. In Router mode
traffic is routed between all interfaces.
This setting controls the DNS name resolution done by the switch. The
following modes are supported:
No DNS server
Configure IPv4 or IPv6
From any DHCPv6 interfaces
From this DHCPv6 interface
Specify from which DHCPv6-enabled interface a provided domain name
should be preferred.
User's Manual of XGS-6320 Managed Switches
No DNS server will be used..
Explicitly specify the name of local domain.
Make sure the configured domain name meets your organization's
given domain.
The first domain name offered from a DHCPv6 lease to a
DHCPv6-enabled interface will be used.
49
Advertisement
Table of Contents
