Example:
To configure length of command display with 5 lines for current terminal session.
Switch # service terminal length 5
4.3.23 snmp-server community
Command:
snmp-server community <comm> [ ro | rw ]
<comm>
Community word
ro
Read only
rw
Read write
Default:
None
Usage Guide:
To configure the Read / Write / Source network Community of SNMP
Example:
To configure the Read / Write / Source network Community (Read only, Community: 22) of SNMP
Switch# configure terminal
Switch (config)# snmp-server community 22 ro
4.3.24 snmp-server contact
Command:
snmp-server contact <line>
<line>
contact string
Default:
None
Usage Guide:
To configure the sysContact string of SNMP
Example:
To configure the sysContact string (Server123) of SNMP
-61-
Command Guide