Bandwidth; Channel-Group - Planet Networking & Communication GS-2240-48T4X Command Manual

Example:
To enter the interface ge1 and ge2
Switch# configure terminal
Switch (config)# interface range ge1 - 2
Switch(config-if-range)#

4.3.5.1 bandwidth

Command:
access-list action deny
action Access list action
Default:
Deny
Usage Guide:
To configure Deny for the ACL action.
Example:
To configure Deny ACL action for the ge4.
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # access-list action deny

4.3.5.2 channel-group

Command:
channel-group <1-32> mode [active | passive]
<1-32> Channel group number
mode Channel mode commands
active Enable initiation of LACP negotiation on a port
passive Disable initiation of LACP negotiation on a port
Default:
Disable
Usage Guide:
To enable active or passive mode for the LACP.
-22-
Command Guide