Storm-Control; Switchport Access Vlan - Planet Networking & Communication GS-2240-48T4X Command Manual

Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # speed 100-full

4.3.5.32 storm-control

Command:
storm-control [broadcast | dlf | multicast] {disable | level pps <0-100000>}
broadcast 100Mbps-full
dlf 100Mbps-half
multicast 1Gbps
disable 10Gbps
level pps Threshold Level
<0-100000> Threshold pps
Default:
Auto
Usage Guide:
To configure storm-control for specific interface
Example:
To configure storm-control (1000 PPS) for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # storm-control broadcast level pps 1000

4.3.5.33 switchport access vlan

Command:
switchport access vlan <vlan_id>
<vlan_id> VLAN ID of the VLAN when this port is in access mode
Default:
1
-38-
Command Guide