Spanning-Tree Portfast; Speed - Planet Networking & Communication GS-2240-48T4X Command Manual

4.3.5.30 spanning-tree portfast

Command:
spanning-tree portfast { bpdu-filter [default | disable | enable] | bpdu-guard [default |
disable | enable]}
bpdu-filter Set the portfast bpdu-filter for the port
bpdu-guard Guard the port against reception of BPDUs
default Default
disable Disable
enable Enable
Default:
Disabled
Usage Guide:
To enable prot-fast mode of CIST Normal Port Configuration for specific interface
Example:
To enable prot-fast mode (bpdu-filter) of CIST Normal Port Configuration for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # spanning-tree portfast bpdu-filter enable

4.3.5.31 speed

Command:
speed [100-full | 100-half | 1000-full | 10000-full | auto]
100-full 100Mbps-full
100-half 100Mbps-half
1000-full 1Gbps
10000-full 10Gbps
Auto Auto
Default:
Auto
Usage Guide:
To configure line speed for specific interface
Example:
To configure line speed (100Mbps-full) for ge4
-37-
Command Guide