Table of Contents
Advertisement
3.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch and
the terminal will run self testing procedures. Then, the following message asks to
log in user name and password. The factory default user name and password are
shown as follows and the login screen in Figure 3-3 appears.
Username: admin
Password: admin
The following console screen based on the GS-4210-24T4S is the
same as those of the GS-4210 series.
Note
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
3.2 Configuring IP Address via the Console
The Managed Switch is shipped with default IP address as shown below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
7
Advertisement
Table of Contents
