Logging Host - Planet Networking & Communication GS-2240-48T4X Command Manual

timer Set the interval at which packets are sent
<5-300> Rate at which LLDP packets are sent (in sec)
Default:
N/A
Usage Guide:
To configure the LLDP.
Example:
To enable the LLDP.
Switch# configure terminal
Switch (config)# lldp enable

4.3.15 logging host

Command:
logging host <hostname> | <ipv4_ucast>
logging Syslog
host host
<hostname> Domain name of the log server
<ipv4_ucast> IP address of the log server
Default:
0
Usage Guide:
To configure address of log server
Example:
To configure address of log server
Switch# configure terminal
Switch (config)# logging host 192.168.5.5
-57-
Command Guide