Snmp-Server Enable Traps; Snmp-Server Group - Planet Networking & Communication GS-2240-48T4X Command Manual

Switch# configure terminal
Switch (config)# snmp-server contact Server123

4.3.25 snmp-server enable traps

Command:
snmp-server enable traps
Default:
Disabled
Usage Guide:
To enable the SNMP trap Service
Example:
To enable the SNMP trap Service
Switch# configure terminal
Switch (config)# snmp-server enable traps

4.3.26 snmp-server group

Command:
snmp-server group <group_name> v3 { auth |noauth | priv }
<GroupName> group name
v3 v3 security model
auth authNoPriv Security Level
noauth noAuthNoPriv Security Level
priv authPriv Security Level
Default:
None
Usage Guide:
To configure the Group of SNMP
Example:
To configure the Group (Level: Auth, Group: qq) of SNMP
-62-
Command Guide