Lacp Timeout; Line-Rate - Planet Networking & Communication GS-2240-48T4X Command Manual

4.3.5.14 lacp timeout

Command:
lacp timeout short | long
lacp Enable LACP on this interface
timeout The period between BPDU transmissions
short Transmit BPDU each second (fast timeout)
long Transmit BPDU each 30th second (slow timeout)
Default:
Short
Usage Guide:
To configure LACP timeout type for specific interface
Example:
To enable LACP timeout type (long) for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # lacp timeout long

4.3.5.15 line-rate

Command:
line-rate { egress <line rate> [burst <burstsize>] | ingress <line rate> [burst
<burstsize> }
egress Egress rate
ingress Ingress rate
<line rate> Limit rate <64-10485760 kbps> (usable units : k, m, g, must be a multiple of 64k)
<burstsize> Burst size <32 kbit - 128 Mbit> (usable units : k, m, must be a multiple of 32k)
Default:
Disable
Usage Guide:
To configure line rate for specific interface
Example:
To configure line rate (Egress rate: 120Mbps) for for ge4
-29-
Command Guide