Show Static-Channel-Group - Planet Networking & Communication GS-2240-48T4X Command Manual

Usage Guide:
To display the startup-config.
Example:
To display the startup-config.
Switch # show startup-config
!
!
spanning-tree mst config
!
no multiple-spanning-tree enable
!
interface lo
mtu 32768
!
interface vlan1
ip address 192.168.0.100/24
!
interface ge1
jumbo-frame 13312

4.14.24 show static-channel-group

Command:
show static-channel-group
Default:
N/A
Usage Guide:
To display the Static channel.
Example:
To display the Static channel.
Switch # show static-channel-group
-91-
Command Guide