Show Ip Igmp Snooping - Planet Networking & Communication GS-2240-48T4X Command Manual

Switch # show ip dhcp snooping
switch DHCP snooping is enabled
DHCP snooping is configured on following VLANS:
1
Verification of hwaddr field is enabled

4.14.8 show ip igmp snooping

Command:
show ip igmp snooping [ vlan <vlan_list> ] [ group ( vlan <vlan_list> ) ] [mrouter
( vlan <vlan_list> ) ] ] [querier ( vlan <vlan_list> )]
group IGMP Snooping group information
mrouter IGMP Snooping Mrouter information
querier IGMP Snooping Querier information
vlan Identify the VLAN to use
Default:
N/A
Usage Guide:
To display the IGMP Snooping information.
Example:
To display the IGMP Snooping information (Querier mode, VLAN 1).
Switch # show ip igmp snooping querier vlan 1
Global IGMP Snooping Querier Configuration
------------------------------------
vlan :1
------------------------------------
Admin State
Querier IP Address
Last-Member-Query-Count
Last-Member-Query-Interval
Query Interval
Other Querier Interval
Query Response Time
:Disable
:0.0.0.0
:2
:1000(ms)
:125(s)
:255(s)
:10(s)
-82-
Command Guide