Switch# configure terminal
Switch (config)# snmp-server group qq v3 auth
4.3.27 snmp-server host
Command:
snmp-server host <IP> <conf_name>
<IP>
SNMP host's IP address
<conf_name>
Name of the host configuration
Default:
None
Usage Guide:
To configure the SNMP Trap Configuration
Example:
To configure the SNMP Trap Configuration (below table)
Switch# configure terminal
Switch (config)# snmp-server host 192.168.0.4 traps www
4.3.28 snmp-server location
Command:
snmp-server location <line>
<line>
contact string
Default:
None
Usage Guide:
To configure the sysLocation string of SNMP
Example:
To configure the sysLocation string (Server123) of SNMP
-63-
Command Guide