Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # lldp frame-format snap
4.3.5.18 lldp management-address
Command:
lldp management-address <ip>
<ip>
IP address (e.g. 10.0.0.1)
Default:
Disabled
Usage Guide:
To configure management address of LLDP TLV for specific interface
Example:
To configure management address (192.168.0.100) of LLDP TLV for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # lldp management-address 192.168.0.100
4.3.5.19 mac-address-learning enable
Command:
mac-address-learning enable
Default:
Enabled (Auto)
Usage Guide:
To enable learning of MAC address table for specific interface
Example:
To enable learning of MAC address table for ge4
Switch# configure terminal
-31-
Command Guide