Ip Igmp Snooping - Planet Networking & Communication GS-2240-48T4X Command Manual

<Port> Port
<IP address>
<MAC address>
database write-delay
<15-86400>
errdisable recovery cause dhcp-rate-limit
errdisable recovery interval
<1-3600>
verify mac-address
vlan VLAN
Default:
N/A
Usage Guide:
To enable DHCP-snooping for VLAN
Example:
To enable DHCP-snooping for VLAN ID 1
Switch# configure terminal
Switch (config)# ip dhcp snooping vlan 1

4.3.9 ip igmp snooping

Command:
ip igmp snooping { delay-time <0-260> vlan <VLAN ID> | fast-leave vlan <VLAN ID> |
last-member-query-count <2-7> vlan <VLAN ID> | last-member-query-interval
<1000-25500> vlan <VLAN ID> | mrouter interface <Port> vlan <VLAN ID> |
multicast-vlan
querier-timeout <60-300> vlan <VLAN ID> | query-interval <1-18000> vlan <VLAN ID>
| query-max-response-time <1-25> vlan <VLAN ID> | report-suppression vlan <VLAN
ID> | robustness-variable <2-7> vlan <VLAN ID> | source-ip <IP> vlan <VLAN ID> |
static-group <IP> vlan <VLAN ID> | version <1-3> vlan <VLAN ID> | vlan <VLAN ID>}
delay-time
fast-leave
last-member-query-count
last-member-query-interval Last Member Query Interval
limit
mrouter
IP address
MAC address
DHCP-snooping write-delay
Delay time to write(default: 30s)
DHCP-snooping interval
DHCP-snooping interval(default: 30)
DHCP-snooping verify
interface vlan <VLAN
Delay time for dynamic leave group record
Fast Leave Processing
Last Member Query Count
IGMP Limit
Multicast Router
DHCP-snooping -rate-limit
ID> | querier vlan
-51-
Command Guide
<VLAN ID> |