Port-Channel Load-Balance; Static-Channel-Group Member - Planet Networking & Communication GS-2240-48T4X Command Manual

Default:
N/A
Usage Guide:
To enter the aggregation group.
Example:
To enter the aggregation group(po1)
Switch# configure terminal
Switch (config)# interface po1
Switch (config-po1)#

4.3.6.1 port-channel load-balance

Command:
port-channel load-balance { dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip |
src-mac }
dst-ip Destination IP address based load balancing
dst-mac Destination Mac address based load balancing
src-dst-ip Source and Destination IP address based load balancing
src-dst-mac Source and Destination Mac address based load balancing
src-ip Source IP address based load balancing
src-mac Source Mac address based load balancing
Default:
N/A
Usage Guide:
To configure load-balance rule for groups.
Example:
To configure load-balance rule(dst-ip) for groups sa1
Switch# configure terminal
Switch (config)# interface sa1
Switch (config-sa1) # port-channel load-balance dst-ip

4.3.6.2 static-channel-group member

Command:
static-channel-group member { add | remove }
-47-
Command Guide